Hydraulic Filter > Cartridge Filter

FL Cartridge filter

LINS cartridge filter are available with microfiber and stainless-steel mesh elements. The flow path of the cartridge filter is only from Port 2 to Port 1.

Do not be used in reverse flow from port 1 to port 2, even with a reverse free flow check valve installed.

●    Element Differential pressure is 210 bar (3000 psi). 

●    Metal mash element features a 304 stainless steel mesh media.

●    Wire mesh elements have a 40 micron nominal rating. Other rating can be customized.

●    Microfiber elements feature a pleated microglass media and only for FL16A and FL18A.

●    Microfiber elements are available in 1 μm, 3 μm, 10 μm, and 25 μm nominal ranges.

━Rating

Max. operating pressure : 350 bar (5000 psi)

Element ∆P      : 210 bar

Flow Rate        : 40-320 LPM (10-80 GPM)

█ MODEL CONFIGURATION

①: Series: Cartridge filter

②: Cavity Size

        13: 13A         16: 16A         18: 18A

③: Design Number: A

④: Filter Rating

* This table display a part of filter elements.

If other filtration rating is required, please contact factory.

⑤: Seal

        N: NBR     V: Viton

█ DIMENSIONAL DRAWING (mm)

█ SYMBOL